using Epoxy flooring to Your Garage floors

Many times we don’t believe about our garages or pay much focus on the look of them. They are simply just a location to park the vehicles and store the excess boxes of Christmas adornments and such. However, like any other room in your house your storage area floor needs to be taken care and attention of.
Because of the utilize it gets, coupled with normal water, gas and oil that will inescapable be spilled after it, garage floor coverings may easily become destroyed and get started to fall apart after a few years useful. Epoxy layer is one means to fix your garage floors challenge. Epoxy finish applies a level of sealant and protectant to your concrete storage floor to make it resist staining, moisture problems and helps it maintain steadily its appearance.
Installing epoxy floor requires a little up-front prep before beginning. The most important step in the process is making sure that the ground you will apply the epoxy layer onto is free from moisture, residual color and doesn’t have a concrete sealer or other finishing applied to it.
To check for moisture, have a sheet of vinyl and take it to a 3-feet x 3-foot area using masking tape. Keep it there for about two days and then remove and check for any moisture collecting privately of the clear plastic facing the ground. If moisture exists, than an epoxy flooring layer is not suitable as epoxy needs a dry surface to properly bond with the floor.
Next, we’ll test to make certain the flooring does not have a sealant already put on it. This test will also check for the occurrence of natural oils in the concrete as well. Have a cup of water and pour it immediately onto the existing flooring. It will soak into the floor in a reasonable amount of time. If it beads or perhaps sits on top of the flooring then your floor has probably already been sealed or contains oil pollutants. Epoxy floor coverings is not suitable for cement floors that contain already been closed or contain any type of oil residue as it will not bond.
Finally, if you are willing to spend almost a year testing an area of your garage area floor for suitability to installing epoxy flooring you can paint a small area with regular, oil-based teeth enamel. If this test area lasts for several a few months then chances are an epoxy covering will last as well. However, if you opt to proceed with making use of the epoxy layer you will need to eliminate this enamel coating which will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *