application of Epoxy flooring to Your Garage surface

Many times we don’t think about our garages or pay much focus on their appearance. They are simply just a location to park the vehicles and store the extra boxes of Xmas designs and such. However, like any other room in your own home your car port floor must be taken care of.
Due to the utilize it gets, coupled with normal water, gas and olive oil that will inescapable be spilled upon it, garage floor coverings can certainly become harmed and get started to break apart over time of use. Epoxy covering is one method for your garage floors challenge. Epoxy covering applies a coating of sealant and protectant to your concrete garage area floor to help it avoid staining, moisture problems and helps it maintain steadily its appearance.
Installing epoxy floor takes a little up-front planning before beginning. The main step in the procedure is making sure that the ground you will apply the epoxy finish onto is free from moisture, residual color and doesn’t have a concrete sealer or other finishing put on it.
To test for moisture, have a sheet of clear plastic and take it to a 3-foot x 3-foot area using masking tape. Keep it there for approximately two times and then remove and look for any moisture collecting on the side of the plastic material facing the ground. If moisture exists, than an epoxy floors coating is not suitable as epoxy needs a dry surface to properly connection with the floor coverings.
Next, we’ll test to be sure the flooring doesn’t have a sealant already put on it. This test will also look for the presence of oils in the cement as well. Take a cup of normal water and pour it immediately onto the existing flooring. It will soak in to the floor in a reasonable timeframe. If it beads or just sits together with the flooring then your floor coverings has probably already been sealed or contains oil impurities. Epoxy floor coverings is not suited to cement floors that contain already been covered or contain any type of oil residue as it will not bond.
Finally, if you are prepared to spend almost a year testing an area of your garage area floor for suitability to setting up epoxy flooring you can coloring a tiny area with regular, oil-based enamel. If this test area will last for several calendar months then it is likely an epoxy finish can last as well. However, if you decide to proceed with applying the epoxy coating you will need to remove this enamel coating that will require sanding.