Do-It-Yourself garage for Epoxy System

If you’ve ever considered by using a garage area floor epoxy system to protect and enhance the look of your storage area floor, there are a few things you need to understand before purchasing one. Most home improvement stores hold epoxy floor sets designed for the do-it-yourselfer and you might have heard differing views on how well they work. Some will say it’s an outstanding product among others will let you know not to spend your cash. Well, there may be usually a simple explanation as to the reasons the product fails for a few floors.
One reason behind failure is not every concrete floor is suitable for making use of an epoxy covering. Many flooring surfaces have too much hydrostatic pressure, signifying water techniques from the under the slab up to the surface in a process called capillary action. Water then gathers on the top, which breaks the relationship between the concrete and the epoxy coating. If the floor “sweats” even when it’s dry outside or there are areas that seem to be to stay damp for extended periods of time, then an epoxy covering will almost certainly fail. It’ll slowly but surely chip and flake away. Even though you don’t think there is a moisture problem, it’s wise to use an efflorescence or sodium blocker before the epoxy. This can help prevent moisture content from triggering problems.

The most probable reason for failing is inappropriate surface preparation. The floor must be completely clean and stripped of most other coatings. Any discolorations or foreign chemicals (essential oil, grease, color, etc.) will prevent sufficient bonding between your cement and epoxy, leading to chipping and flaking. Most companies will apply a jacket of sealer to a car port floor after set up. Normally it takes many years for the sealer to wear off completely. This sealer must be removed for epoxy to previous. Although acidity etching can be an important step, you won’t remove sealer and most stains. Etching will only open up the pores of bare cement, therefore you must do all cleaning and stripping before etching with acid.

Before purchasing a garage floor epoxy system, you will need to first decide if your floor is right for this. If it sweats often or there are areas that are constantly damp, then forget about it. Make sure that you are prepared to take time to prep the floor properly, as this is actually the most critical part. It also really helps to put one or two jackets of clear concrete sealer on top to provide as a wear layer. Water based acrylic sealers are ideal for indoor home use. Despite any bad reviews you’ve found out about the do-it-yourself car port floor epoxy system, it’s rather a successful project whether it’s done correctly.

Leave a Reply

Your email address will not be published. Required fields are marked *