DIY storage area Floor Epoxy System

If you’ve ever considered utilizing a garage area floor epoxy system to safeguard and enhance the look of your storage area floor, there are a few things you should know before purchasing one. Most home improvement stores take epoxy floor packages designed for the do-it-yourselfer and you’ve probably heard differing thoughts about how well they work. Some will say it’s an excellent product and more will let you know not to spend your money. Well, there may be usually a fairly easy explanation as to why the product fails for some floors.
One reason behind failure is not every concrete floor is suitable for applying an epoxy finish. Many flooring surfaces have too much hydrostatic pressure, meaning water techniques from the under the slab up to the surface in an activity called capillary action. Water then gathers on the surface, which breaks the connection between the concrete and the epoxy jacket. If the floor “sweats” even when it’s dry outside or there are areas that seem to be to stay damp for long periods of time, then an epoxy layer will almost certainly fail. It’ll slowly but surely chip and flake away. Even if you don’t think there is a moisture problem, it’s wise to use an efflorescence or sodium blocker prior to the epoxy. This can help prevent water from triggering problems.

The most probable reason for failing is poor surface preparation. The ground must be completely clean and stripped of most other coatings. Any discolorations or foreign substances (olive oil, grease, paint, etc.) will prevent sufficient bonding between your cement and epoxy, leading to chipping and flaking. Most contractors will apply a jacket of sealer to a garage area floor after assembly. It can take several years for the sealer to wear off completely. This sealer must be removed for epoxy to last. Although acid solution etching can be an important step, it will not remove sealer and most stains. Etching is only going to start the pores of bare cement, therefore you should do all cleaning and stripping before etching with acid solution.

Before investing in a storage floor epoxy system, you need to first decide if your floor is right for this. If it sweats often or there are areas that are constantly moist, then forget about it. Be sure that you are willing to take time to prep the floor properly, as this is the most critical part. It also really helps to put one or two coats of clear concrete sealer on top to serve as a wear layer. Water centered acrylic sealers are ideal for indoor home use. Despite any bad reviews you’ve heard about the do-it-yourself car port floor epoxy system, it can be a successful project if it’s done correctly.

Leave a Reply

Your email address will not be published. Required fields are marked *