DIY garage area Floor Epoxy System

If you’ve ever considered utilizing a car port floor epoxy system to protect and enhance the look of your garage area floor, there are a few things you need to know before purchasing one. Most diy stores carry epoxy floor kits made for the do-it-yourselfer and you’ve probably heard differing ideas how well they work. Some will say it’s an outstanding product yet others will let you know not to waste your money. Well, there exists usually a simple explanation as to why this product fails for a few floors.
One reason behind failure is not every concrete floor is ideal for making use of an epoxy layer. Many flooring have too much hydrostatic pressure, meaning water moves from the under the slab up to the top in an activity called capillary action. Wetness then gathers on the top, which breaks the bond between the cement and the epoxy jacket. If the floor “sweats” even when it’s dry outdoors or there are areas that seem to stay moist for long periods of time, then an epoxy layer will almost certainly fail. It’ll slowly but surely chip and flake away. Even though you don’t think there is a moisture problem, it’s a good idea to use an efflorescence or sodium blocker prior to the epoxy. This will help prevent moisture from leading to problems.

The most possible reason for failing is inappropriate surface preparation. The ground must be completely clean and stripped of all other coatings. Any staining or foreign substances (engine oil, grease, paint, etc.) will prevent adequate bonding between your concrete and epoxy, resulting in chipping and flaking. Most contractors will apply a cover of sealer to a car port floor after unit installation. Normally it takes several years for the sealer to wear off completely. This sealer must be removed for epoxy to previous. Although acidity etching is an important step, it will not remove sealer & most stains. Etching will only open up the skin pores of bare cement, therefore you must do all cleaning and stripping before etching with acidity.

Before purchasing a storage area floor epoxy system, you need to first decide if your floor is right for this. If it sweats often or there are areas that are constantly damp, then forget about it. Be sure that you are prepared to take the time to prep the floor properly, as this is actually the most significant part. In addition, it helps to put one or two coats of clear cement sealer at the top to serve as a wear overcoat. Water established acrylic sealers are perfect for indoor personal use. Despite any bad reviews you’ve found out about the do-it-yourself garage floor epoxy system, it’s rather a successful project whether it’s done correctly.

Leave a Reply

Your email address will not be published. Required fields are marked *