If you’ve ever before considered using a car port floor epoxy system to safeguard and improve the look of your garage floor, there are many things you should know before purchasing one. Most diy stores bring epoxy floor packages created for the do-it-yourselfer and you’ve probably heard differing viewpoints how well they work. Some will say it’s an excellent product and more will let you know not to spend your cash. Well, there may be usually an easy explanation as to why the product fails for some floors.
One reason for failure is not every concrete floor is perfect for making use of an epoxy covering. Many floor surfaces have too much hydrostatic pressure, meaning water techniques from the under the slab up to the surface in an activity called capillary action. Dampness then collects on the top, which breaks the relationship between the cement and the epoxy jacket. If the ground “sweats” even when it’s dry outdoors or there are areas that appear to stay moist for long periods of time, then an epoxy covering will likely fail. It will slowly but surely chip and flake away. Even though you don’t think there is a moisture problem, it’s a good idea to apply an efflorescence or sodium blocker before the epoxy. This will help prevent moisture from creating problems.
The most possible reason for inability is poor surface preparation. The floor must be completely clean and stripped of most other coatings. Any discolorations or foreign substances (oil, grease, coloring, etc.) will prevent enough bonding between your cement and epoxy, leading to chipping and flaking. Most contractors will apply a jacket of sealer to a garage floor after set up. It can take several years for the sealer to wear off completely. This sealer must be removed for epoxy to last. Although acidity etching is an important step, it will not remove sealer & most stains. Etching will only open up the skin pores of bare cement, therefore you should do all cleaning and stripping before etching with acid solution.
Before purchasing a garage area floor epoxy system, you need to first decide if your floor is right for it. If it sweats often or there are areas that are constantly damp, then forget about it. Be sure that you are prepared to take the time to prep the ground properly, as this is the most critical part. It also helps to put a couple of coats of clear concrete sealer at the top to provide as a wear cover. Water based acrylic sealers are perfect for indoor personal use. Despite any bad reviews you’ve heard about the do-it-yourself garage area floor epoxy system, it can be a successful project whether it’s done correctly.