If you’ve ever considered utilizing a storage area floor epoxy system to protect and improve the look of your storage area floor, there are many things you need to know before purchasing one. Most diy stores carry epoxy floor kits suitable for the do-it-yourselfer and you’ve probably heard differing views on how well they work. Some will say it’s an outstanding product among others will let you know not to waste your cash. Well, there exists usually a fairly easy explanation as to why this product fails for some floors.
One reason behind failure is not every concrete floor is ideal for making use of an epoxy covering. Many floors have too much hydrostatic pressure, indicating water goes from the under the slab up to the top in an activity called capillary action. Wetness then gathers on the top, which breaks the connection between the cement and the epoxy overcoat. If the ground “sweats” even though it’s dry outside the house or there are areas that seem to stay damp for extended periods of time, then an epoxy finish will almost certainly fail. It’ll little by little chip and flake away. Even if you don’t think there’s a moisture problem, it’s a good idea to apply an efflorescence or salt blocker prior to the epoxy. This can help prevent dampness from creating problems.
The most probable reason for failing is improper surface preparation. The floor must be completely clean and stripped of all other coatings. Any discolorations or foreign chemicals (engine oil, grease, coloring, etc.) will prevent sufficient bonding between the concrete and epoxy, resulting in chipping and flaking. Most companies will apply a coating of sealer to a car port floor after assembly. Normally it takes several years for the sealer to wear off completely. This sealer must be removed for epoxy to last. Although acid solution etching is an important step, it will not remove sealer & most stains. Etching will only start the skin pores of bare cement, therefore you should do all cleaning and stripping before etching with acid.
Before purchasing a storage floor epoxy system, you need to first decide if your floor is right for this. If it sweats often or there are areas that are constantly moist, then just forget about it. Be sure that you are willing to take time to prep the floor properly, as this is actually the most significant part. It also helps to put a couple of jackets of clear cement sealer at the top to provide as a wear coating. Water founded acrylic sealers are well suited for indoor home use. Despite any bad reviews you’ve heard about the do-it-yourself garage area floor epoxy system, it’s rather a successful project whether it’s done correctly.