Awesome storage for Epoxy System

If you’ve ever considered utilizing a garage area floor epoxy system to safeguard and enhance the look of your car port floor, there are many things you should know before purchasing one. Most home improvement stores take epoxy floor products designed for the do-it-yourselfer and you might have heard differing thoughts about how well they work. Some will say it’s an excellent product as well as others will let you know not to waste your cash. Well, you can find usually an easy explanation as to the reasons the product fails for a few floors.
One reason for failure is don’t assume all concrete floor is well suited for making use of an epoxy finish. Many floor surfaces have too much hydrostatic pressure, meaning water movements from the under the slab up to the top in an activity called capillary action. Water then collects on the surface, which breaks the connection between the concrete and the epoxy coating. If the ground “sweats” even though it’s dry outside the house or there are areas that seem to stay moist for long periods of time, then an epoxy layer will likely fail. It will gradually chip and flake away. Even though you don’t think there is a moisture problem, it’s wise to use an efflorescence or salt blocker prior to the epoxy. This will help prevent water from creating problems.

The most probable reason for failure is inappropriate surface preparation. The ground must be completely clean and stripped of most other coatings. Any spots or foreign chemicals (engine oil, grease, paint, etc.) will prevent enough bonding between the concrete and epoxy, resulting in chipping and flaking. Most contractors will apply a coating of sealer to a car port floor after set up. It can take many years for the sealer to wear off completely. This sealer must be removed for epoxy to last. Although acidity etching is an important step, you won’t remove sealer & most stains. Etching is only going to open up the skin pores of bare cement, therefore you should do all cleaning and stripping before etching with acidity.

Before purchasing a garage floor epoxy system, you will need to first decide if your floor is right for this. If it sweats often or there are areas that are constantly moist, then forget about it. Be sure that you are willing to take the time to prep the ground properly, as this is actually the most significant part. In addition, it helps to put one or two coats of clear concrete sealer on top to serve as a wear layer. Water structured acrylic sealers are suitable for indoor domestic use. Despite any bad reviews you’ve heard about the do-it-yourself storage floor epoxy system, it can be a successful project if it’s done correctly.

Leave a Reply

Your email address will not be published. Required fields are marked *