Applying Epoxy flooring to any Garage floors

Often we don’t believe about our garages or pay much attention to their appearance. They are merely a location to park the vehicles and store the extra boxes of Xmas decor and such. However, like any other room in your own home your garage area floor must be taken attention of.
Due to the use it gets, combined with water, gas and petrol that will unavoidable be spilled upon it, garage floor coverings may easily become ruined and begin to fall apart over time useful. Epoxy finish is one means to fix your garage flooring challenge. Epoxy covering applies a layer of sealant and protectant to your concrete garage area floor to make it resist staining, moisture problems and helps it maintain steadily its appearance.
Installing epoxy floor requires a little up-front planning before beginning. The main step in the process is ensuring the floor you will apply the epoxy finish onto is free of moisture, residual car paint and doesn’t have a cement sealer or other completing applied to it.
To check for moisture, have a sheet of clear plastic and take it to a 3-ft . x 3-foot area using masking tape. Keep it there for approximately two times and then remove and check for any moisture collecting privately of the vinyl facing the floor. If moisture exists, than an epoxy flooring layer is not appropriate as epoxy needs a dried surface to properly bond with the floor.
Next, we’ll test to make sure the flooring doesn’t have a sealant already applied to it. This test will also look for the presence of natural oils in the concrete as well. Take a cup of normal water and put it straight onto the existing flooring. It will soak into the floor in an acceptable amount of time. If it beads or maybe sits together with the flooring then your flooring has probably already been sealed or includes oil pollutants. Epoxy floor is not suited to cement floors which have already been sealed or contain any kind of oil residue as you won’t bond.
Finally, if you are prepared to spend several months testing a location of your storage floor for suitability to installing epoxy floor coverings you can color a tiny area with regular, oil-based enamel. If this test area endures for several weeks then it is likely an epoxy layer will last as well. However, if you opt to proceed with making use of the epoxy coating you will need to remove this enamel finish that may require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *