Applying Epoxy Coatings to Your Garage floor

Often we don’t believe about our garages or pay much focus on their appearance. They are merely a destination to park the autos and store the extra boxes of Christmas accessories and such. However, like any other room in your own home your garage area floor must be taken treatment of.
Because of the utilize it gets, coupled with drinking water, gas and petrol that will inevitable be spilled upon it, garage floor can certainly become ruined and start to break apart after a few years useful. Epoxy coating is one means to fix your garage flooring challenge. Epoxy layer applies a coating of sealant and protectant to your concrete storage floor to make it withstand staining, moisture problems and helps it maintain steadily its appearance.
Installing epoxy floor requires a little up-front prep before beginning. The most important step in the process is making sure that the ground you will apply the epoxy covering onto is free of moisture, residual color and doesn’t have a concrete sealer or other completing applied to it.
To check for moisture, take a sheet of clear plastic and take it to a 3-foot x 3-foot area using masking tape. Keep it there for about two days and nights and then remove and look for any moisture collecting on the side of the plastic facing the ground. If moisture exists, than an epoxy floors finish is not suited as epoxy requires a dried surface to properly connection with the floors.
Next, we’ll test to be sure the flooring does not have a sealant already put on it. This test will also look for the occurrence of natural oils in the cement as well. Take a cup of water and pour it immediately onto the prevailing flooring. It should soak in to the floor in an acceptable timeframe. If it beads or maybe sits together with the flooring then your floor coverings has probably already been sealed or has oil pollutants. Epoxy flooring is not ideal for cement floors that have already been closed or contain any type of petrol residue as you won’t bond.
Finally, if you are prepared to spend several months testing a location of your car port floor for suitability to installing epoxy floor coverings you can paint a little area with regular, oil-based teeth enamel. If this test area endures for several a few months then chances are an epoxy coating can last as well. However, if you opt to proceed with making use of the epoxy layer you will need to eliminate this enamel covering which will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *