Applying Epoxy Coatings to the Garage floors

Often we don’t think about our garages or pay much attention to their appearance. They are simply just a place to park the vehicles and store the extra boxes of Xmas decor and such. However, like any other room in your own home your garage area floor must be taken treatment of.
Due to the utilize it gets, combined with water, gas and essential oil that will unavoidable be spilled after it, garage floors can certainly become ruined and begin to break apart over time of use. Epoxy finish is one means to fix your garage floor challenge. Epoxy layer applies a covering of sealant and protectant to your concrete storage floor to help it withstand staining, moisture problems and helps it maintain its appearance.
Installing epoxy floor coverings requires a little up-front prep before beginning. The most important step in the process is ensuring the floor you will apply the epoxy finish onto is free of moisture, residual coloring and does not have a concrete sealer or other finishing put on it.
To test for moisture, have a sheet of plastic material and take it to a 3-foot x 3-foot area using masking tape. Keep it there for about two days and then remove and look for any moisture collecting on the side of the clear plastic facing the ground. If moisture is present, than an epoxy floor coverings layer is not suitable as epoxy needs a dried surface to properly connection with the floor.
Next, we’ll test to ensure the flooring does not have a sealant already applied to it. This test will also check for the presence of oils in the cement as well. Take a cup of normal water and pour it directly onto the prevailing flooring. It should soak into the floor in a reasonable amount of time. If it beads or simply sits together with the flooring then the floor has probably already been sealed or contains oil pollutants. Epoxy floors is not suited to cement floors that have already been covered or contain any kind of petrol residue as it will not bond.
Finally, if you are prepared to spend almost a year testing an area of your garage area floor for suitability to installing epoxy floors you can color a little area with regular, oil-based teeth enamel. If this test area endures for several calendar months then chances are an epoxy coating can last as well. However, if you opt to proceed with making use of the epoxy coating you will need to eliminate this enamel layer which will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *