Applying Epoxy Coatings to a Garage Flooring

Often we don’t believe about our garages or pay much attention to their appearance. They are merely a location to park the autos and store the extra boxes of Holiday designs and such. However, like any other room in your own home your car port floor needs to be taken good care of.
Due to the make use of it gets, combined with water, gas and engine oil that will unavoidable be spilled upon it, garage floor coverings can simply become ruined and start to fall apart after a few years of use. Epoxy covering is one means to fix your garage floors challenge. Epoxy finish applies a coating of sealant and protectant to your concrete car port floor to help it withstand staining, moisture problems and helps it maintain its appearance.
Installing epoxy floor requires a little up-front preparation before beginning. The main step in the procedure is ensuring the ground you will apply the epoxy layer onto is free from moisture, residual paint and doesn’t have a concrete sealer or other completing applied to it.
To test for moisture, have a sheet of clear plastic and take it to a 3-feet x 3-foot area using masking tape. Keep it there for about two days and then remove and look for any moisture collecting privately of the clear plastic facing the floor. If moisture exists, than an epoxy floor layer is not ideal as epoxy needs a dried surface to properly relationship with the floors.
Next, we’ll test to make certain the flooring does not have a sealant already applied to it. This test will also look for the presence of natural oils in the cement as well. Take a cup of normal water and put it straight onto the existing flooring. It should soak in to the floor in a reasonable timeframe. If it beads or simply sits on top of the flooring then the flooring has probably already been sealed or includes oil contaminants. Epoxy floor coverings is not ideal for cement floors that contain already been sealed or contain any kind of petrol residue as you won’t bond.
Finally, if you are willing to spend almost a year testing an area of your car port floor for suitability to installing epoxy floor coverings you can color a little area with regular, oil-based teeth enamel. If this test area continues for several weeks then it is likely an epoxy layer can last as well. However, if you decide to proceed with making use of the epoxy covering you will need to remove this enamel covering that may require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *