Applying Epoxy Coatings to a Garage Flooring

Often we don’t think about our garages or pay much attention to the look of them. They are merely a spot to park the autos and store the excess boxes of Holiday decor and such. However, like any other room in your house your garage floor needs to be taken care of.
Because of the make use of it gets, combined with normal water, gas and essential oil that will inevitable be spilled upon it, garage floors can simply become damaged and start to break apart over time useful. Epoxy coating is one means to fix your garage floor coverings challenge. Epoxy finish applies a level of sealant and protectant to your concrete storage area floor to help it withstand staining, moisture problems and helps it maintain its appearance.
Installing epoxy flooring takes a little up-front preparation before beginning. The main step in the process is making sure that the floor you will apply the epoxy covering onto is free of moisture, residual car paint and doesn’t have a cement sealer or other finishing applied to it.
To check for moisture, take a sheet of plastic material and take it to a 3-foot x 3-foot area using masking tape. Keep it there for about two days and nights and then remove and look for any moisture collecting on the side of the plastic material facing the floor. If moisture is present, than an epoxy floor coverings finish is not ideal as epoxy needs a dried up surface to properly connection with the floor coverings.
Next, we’ll test to make sure the flooring doesn’t have a sealant already applied to it. This test will also check for the occurrence of natural oils in the concrete as well. Have a cup of drinking water and put it directly onto the existing flooring. It will soak in to the floor in an acceptable amount of time. If it beads or just sits together with the flooring then the floor coverings has probably already been sealed or consists of oil impurities. Epoxy floors is not suitable for cement floors which may have already been sealed or contain any type of petrol residue as you won’t bond.
Finally, if you are willing to spend almost a year testing a location of your garage floor for suitability to putting in epoxy floors you can coloring a little area with regular, oil-based enamel. If this test area lasts for several months then chances are an epoxy covering can last as well. However, if you opt to proceed with applying the epoxy coating you’ll need to eliminate this enamel coating that may require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *