application of Epoxy flooring to a Garage floors

Often we don’t believe about our garages or pay much attention to the look of them. They are simply just a location to park the cars and store the extra boxes of Xmas accessories and such. However, like any other room in your own home your storage area floor must be taken care and attention of.
Because of the utilize it gets, combined with drinking water, gas and essential oil that will inevitable be spilled upon it, garage flooring can simply become destroyed and commence to break apart after a few years of use. Epoxy coating is one method for your garage floor challenge. Epoxy finish applies a level of sealant and protectant to your concrete garage area floor to make it resist staining, moisture problems and helps it maintain steadily its appearance.
Installing epoxy floor coverings requires a little up-front planning before beginning. The most important step in the process is ensuring the ground you will apply the epoxy coating onto is free of moisture, residual car paint and doesn’t have a concrete sealer or other finishing put on it.
To check for moisture, have a sheet of plastic material and take it to a 3-foot x 3-foot area using masking tape. Keep it there for about two times and then remove and look for any moisture collecting on the side of the plastic material facing the floor. If moisture is present, than an epoxy floor layer is not suited as epoxy needs a dry out surface to properly relationship with the floor coverings.
Next, we’ll test to make certain the flooring doesn’t have a sealant already put on it. This test will also look for the occurrence of natural oils in the cement as well. Have a cup of normal water and put it straight onto the prevailing flooring. It should soak into the floor in an acceptable timeframe. If it beads or simply sits together with the flooring then your flooring has probably recently been sealed or consists of oil pollutants. Epoxy flooring is not ideal for cement floors that have already been closed or contain any type of petrol residue as it will not bond.
Finally, if you are willing to spend almost a year testing an area of your garage floor for suitability to setting up epoxy floor you can coloring a tiny area with regular, oil-based teeth enamel. If this test area can last for several weeks then it is likely an epoxy finish can last as well. However, if you decide to proceed with applying the epoxy covering you’ll need to remove this enamel covering that will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *